Viewing The Test Log; Diagnostic Error Message Tables; Diagnostic Error Messages - IBM totalstorage 326 User Reference

Viewing the test log

The test log will not contain any information until after the diagnostic program has
run.
Note: If you already are running the diagnostic programs, begin with Step 4
To view the test log:
1. Ensure a monitor, keyboard, and mouse is connected to the Model 326.
2. Power on the Model 326 engine and watch the screen.
3. When the message F2 for Diagnostics appears, press F2.
4. When the Diagnostic Programs screen appears, select Utility from the top of
5. Select View Test Log from the list that appears; then, follow the instructions on

Diagnostic error message tables

Table 28 describes the error messages that might appear when you run the
diagnostic programs.
Important: If diagnostic error messages that are not listed in Table 28 appear,
make sure that your appliance has the latest levels of BIOS, Advanced System
Management Processor, and diagnostics microcode.
In the following error codes, if XXX is 000, 195, or 197, do not replace a part.
These error codes have the following meanings:
000
195
197
For all other error codes, replace the part or perform the actions indicated.
Table 28. Diagnostic error messages
Error Code Meaning
001-XXX-000 Failed core tests
001-XXX-001 Failed core tests
001-250-000 Failed System board ECC
001-250-001 Failed Processor board ECC
005-XXX-000 Failed Video test
011-XXX-000 Failed COM1 Serial Port test
011-XXX-001 Failed COM2 Serial Port test
148
Model 326 User's Reference
If the Model 326 engine is on, shut down your operating system and restart the
engine.
If a power-on password or administrator password is set, you will be prompted
for it. Type in the appropriate password, then press Enter.
the screen.
the screen.
The system maintains the test-log data while the Model 326 is powered on.
When you turn off the power to the Model 326, the test log is cleared.
The test passed.
Esc was pressed to end the test.
This is a warning error and might not indicate a hardware failure.
FRU/action
System board
System board
System board
1. Processor/PCI board
2. System board
System board
System board
System board