IBM totalstorage 326 User Reference page 56

Using a local UNIX name space
You should have to perform this procedure only once. You might have to add more
groups and users in the Server for PCNFS page if you add more users and groups
to your UNIX environment and Model 326 or Windows domain at a later time.
10. On the Users page, you must add all of the UNIX users who will be accessing
11. When you finish adding users, click Apply.
12. In the left pane, click User Name Mapping.
13. In the right pane, select Personal Computer Network File System (PCNFS).
14. In the Password file path and name field, type
15. In the Group file path and name field, type
16. Click Apply.
17. Click Maps.
44
Model 326 User's Reference
1. Open the IBM NAS Administration console by double-clicking the IBM NAS
Admin icon on the NAS desktop.
2. In the left pane, expand File Systems, then expand Services for UNIX.
3. In the left pane, click Server for NFS.
4. In the right pane, in the Computer name: field, enter localhost.
5. In the left pane, click Server for PCNFS.
6. In the right pane, click Groups.
7. On the Groups page, you must add the groups from your UNIX host to which
all of your UNIX users belong. You must know both the group name and the
group ID (GID) number. This information can be found in the /etc/group file on
most UNIX systems.
As an example, on an AIX system, in the following line from an /etc/group file,
the fields are separated by a colon (:). The first field ("staff") is the group
name; the third column ("1") is the GID:
staff:!:1:pemodem,ipsec,netinst,protcs
To add a group, enter the group name and GID number in the Group name
and Group number (GID) fields, and then click New.
8. When you have finished adding groups, click Apply.
9. Click Users.
and storing files on the Model 326 through an NFS share. For each user, you
need to know the Windows user name, the UNIX user name, the primary
group, and the user ID (UID) number. This information can be found in the
/etc/passwd and /etc/group files on most UNIX systems.
As an example, on an AIX system, in the following line from an /etc/passwd
file, the fields are separated by a colon (:). The first field ("user1") is the user
name; the third field ("3135") is the UID, and the fourth field ("1") is the GID of
the user's primary group. This will correspond to a line in the /etc/group file,
where you can find the primary group name corresponding to the GID.
user1:!:3135:1:User 1:/home/user1:/bin/ksh
To add a user, click New, enter the required information, and then click OK.
c:\winnt\system32\drivers\etc\passwd.
c:\winnt\system32\drivers\etc\group.
On the Maps page, you can configure simple maps or advanced maps.
Configure simple maps if the Windows user name and UNIX user name is the
same for each UNIX user to be mapped, and the Windows group name and
UNIX group name is the same for each UNIX group to be mapped. Otherwise,
you should configure advanced maps.