Supplementary Cd Directories - IBM totalstorage 326 User Reference

Table 23. Supplementary CD directories
Directory name
IBM Advanced Appliance
Configuration
DiskImages
I386
W2KSP2
Services for UNIX
Terminal Services Client
readme.txt
126
Model 326 User's Reference
Contents
IBM Advanced Appliance Configuration console and agent installation files. The IBM
Advanced Appliance Configuration agent is preinstalled as a Windows Powered service
on the Model 326. To install the Advanced Appliance Configuration console (on another
network-attached workstation running Windows 98, Windows NT, or Windows 2000),
run lpsetup.exe (if you have Supplementary CD Version 1.6) or setup.bat (if you have
Supplementary CD Version 1.0) from the x:\IBM Advanced Appliance Configuration
directory, where x is the drive letter assigned to your workstation CD-ROM drive.
Note: When the installation completes, it will leave behind a temporary directory
named iaacu on the workstation, under the directory specified by the TEMP
environment variable (usually c:\temp; you can determine the value of the TEMP
variable by typing set temp from a DOS command prompt). Remove this directory
(using Windows Explorer) after the installation has completed.
Contains diskette image for the Recovery Enablement Diskette. To create the Recovery
Enablement Diskette, run RecovDsk.bat and insert a HD 1.44 floppy diskette into drive
A: when prompted. Be sure to read the readme!.txt file located in this directory for
last-minute and model-specific updates.
Windows Powered installation files. If you add device drivers, OS features, and so on,
you might be prompted to insert the Windows Powered CD-ROM. If so, insert the
Supplementary CD, and specify path x:\i386, where x is the drive letter assigned to the
CD-ROM drive.
Windows Powered Service Pack 2, which is preloaded on the Model 326 (if you are at
Version 1.00, Build 70 or later). If you add any device drivers, OS features, and so on,
you should reapply Service Pack 2. Run the executable w2ksp2.exe and follow the
instructions provided.
SFU 2.2 installation files, zipped into a self-extracting executable, sfu22.exe. If you add
features that are not preloaded, you are prompted for these installation files. You must
extract the installation files onto the hard drive of the Model 326. It is recommended
that you use the maintenance drive (D: drive) as the destination, but you can use the
system drive (C: drive). On whatever drive you choose, make sure that you have at
least 250 MB of free space available, create a temporary directory on the drive, and
then issue the following command from the Services for UNIX directory on the
Supplementary CD: sfu22 path, where path is the drive letter and path of the temporary
directory you created. At the prompt, specify the same path you specified in extracting
the files from the CD.
The stand-alone Win32 Terminal Services Client application. The Model 326 appliance
supports Web-based terminal services, so this is an optional installation. To install the
Terminal Services Client, run setup.exe from the Disk1 subdirectory.
This is a text file that describes the contents of the Supplementary CD.