IBM totalstorage 326 User Reference page 163

Table 28. Diagnostic error messages (continued)
Error Code Meaning
166-342-000 System Management failed:
Remote Supervisor Adapter
BIST indicate failed tests).
166-400-000 System Management failed:
System management
hardware on system board
failed) (ISMP Self Test Result
failed tests: x where x =
Flash, RAM, or ROM).
180-XXX-000 Diagnostics LED failure
180-XXX-001 Failed front LED panel test
180-XXX-002 Failed diagnostics LED panel
test
180-XXX-005 Failed SCSI backplane LED
test
180-XXX-006 Memory Board LED test
180-361-003 Failed fan LED test
201-XXX-0NN Failed Memory test
201-XXX-999 Multiple DIMM failure; see
error text for failing DIMMs
202-XXX-001 Failed system cache test
202-XXX-002 Failed system cache test
206-XXX-000 Failed diskette drive test
215-XXX-000 Failed IDE CD-ROM test
217-198-XXX Could not establish drive
parameter
FRU/action
1. Ensure that the latest firmware levels for the Remote
Supervisor Adapter and BIOS
2. Disconnect all server and option power cords from the
unit, wait 30 seconds, reconnect, then retry.
3. Remote Supervisor Adapter
1. Re-flash or update firmware for ISMP
2. System board
Run the diagnostics LED test for the failing LED.
1. System board
2. Power-switch assembly
1. SCSI backplane
2. SCSI backplane cable
3. System board
Suspected part:
1. Memory
2. Processor/PCI board
3. System board
1. Fans
2. System board
1. DIMM Location DIMM1 - DIMM4 where NN can be a
value from 01 to 04. 01 = DIMM2, 02 = DIMM1, 03 =
DIMM4, 04 = DIMM3
2. System board
1. See error text for failing DIMMs
2. System board
1. VRM 1
2. Microprocessor 1
1. VRM 2
2. Microprocessor 2
1. Cable
2. Diskette drive
3. System board
1. CD-ROM drive cables
2. CD-ROM drive
3. System board
1. Check cable and termination
2. SCSI backplane
3. Fixed disk
Appendix D. Engine POST and diagnostic program messages
151