IBM totalstorage 326 User Reference page 48

6. Format all other drives, but do not enable compression. Use all space available
You have completed shared storage setup. You can now continue with "Chapter 5.
Completing networking, clustering, and storage access setup" on page 37.
36
Model 326 User's Reference
b. Select Primary Partition and click Next.
c. Select the entire disk size and click Next.
d. Select Drive Letter as G
e. Enter the following properties:
v File System of NTFS
v Volume Label of Quorum Disk
f. Click Next.
Do not enable disk compression, and select Finish.
for each drive for each logical drive assigned by the operating system. Assign
drive letter H for the second drive (the first user-data volume), and so on.