IBM totalstorage 326 User Reference page 28

The IAACU Console also features the following menus:
File
Family
Appliance
Help
Discovering Model 326 Appliances
Any Model 326 appliance, or other IBM appliance, that is running and is connected
to the same subnet as the system running the IAACU Console is automatically
discovered when you start the IAACU Console. Discovered appliances appear in
the IAACU Console tree view (in the left pane of the IAACU Console window). Each
appliance appears in two locations in the tree view:
v Every discovered appliance is listed in the tree view under All Appliances.
v Each discovered appliance also appears in one of the following sections of the
16
Model 326 User's Reference
host name, serial number, and so on) about each of the Model 326 appliances
that have been discovered by the IAACU Console. However, if you select a
Family, the Information Pane displays information about the Family settings for
the selected Family.
Use the File menu to import or export the IAACU Console configuration
data, to scan the network, or to exit the program.
Use the Family menu to add or delete Families, or to move Families up or
down in the tree view.
Use the Appliance menu to remove a previously discovered appliance from
a Family or group, and to add an appliance to the first matching Family in
the tree view.
Use the Help menu to display product information.
tree view:
– In a Family
If the discovered appliance fits the requirements of a Family, it will
automatically appear as part of a Family.
Notes:
1. If a discovered appliance fits the requirements of more than one Family, it
is automatically added to the first appropriate Family that is listed in the
tree view, starting from the top of the tree. For information on how to move
appliances between families, see "Using Families and Groups in the Tree
View" on page 17.
2. If the Model 326 cannot be discovered by the IAACU console, check the
IP and subnet addresses of the Model 326 and the computer that is
running the IAACU console.
– In the Orphaned Appliances group
If the discovered appliance does not fit a previously configured Family, it is
placed in the Orphaned Appliances group.
– In the Orphaned Externally Configured Appliances group
Appliances that are running the IAACU agent, but that have a network
configuration that was not set by the IAACU agent or console, will appear in
the Orphaned Externally Configured Appliances group. If an appliance is
contained in the Orphaned Externally Configured Appliances group, you can
use the Adopt By First Matching Family function to add it to a previously
defined Family. For more information, see "Using the Adopt by First Matching
Family function" on page 19.