Post Error Messages - IBM totalstorage 326 User Reference

POST error messages

Table 27 provides information about the POST error messages that can appear
during startup.
Note that these diagnostic error messages require the attachment of a monitor,
keyboard, and mouse (before you power on the system) to enable you to see them.
In the following error messages, X can be any number or letter.
Table 27. POST error messages
Error Meaning
code/Symptom
062 Three consecutive boot
failures using the default
configuration
101, 102 System and processor error
106 System and processor error
111 Channel check error
114 Adapter read-only memory
error
129 Internal cache error
151 Real-time clock error
161 Real-time clock battery error
162 Device Configuration error
163 Real-time clock error
164 Memory configuration
changed
175 Hardware error
140
Model 326 User's Reference
FRU/action
1. Run Configuration/Setup
2. Battery
3. System board
4. Processor
System board
System board
1. Failing ISA Adapter
2. DIMM
3. System board
1. Failing Adapter
2. Run Diagnostics
1. Processor
2. Optional processor (if installed)
1. Run Diagnostics
2. Battery
3. System board
1. Run Configuration/Setup
2. Battery
3. System board
1. Run Configuration/Setup
Note: Be sure to load the default settings and any
additional settings; then, save the configuration.
2. Battery
3. Failing Device
4. System board
1. Run Configuration/Setup
2. Battery
3. System board
1. Run Configuration/Setup
2. DIMM
System board