IBM totalstorage 326 User Reference page 30

v Orphaned Externally Configured Appliances
v Conflicting Network Addresses
Creating a Family
To create a Family:
1. Select Create Family from the Family menu.
2. Select Appliance Family Rules.
3. Type the name that will be used for this Family in the Family Name field.
4. Specify network resources to be used by members of the Family.
18
Model 326 User's Reference
Any discovered appliances that have been configured using the IAACU but that
do not meet the rules for any existing Family are automatically added to the
Orphaned Appliances group.
Any discovered appliance that has been configured without using the IAACU tool
and that does not meet the rules for any existing Family is automatically added to
the Orphaned Externally Configured Appliances group. Appliances configured
without the IAACU that meet the rules for any existing Family are automatically
added to the matching Family.
To add an Orphaned Externally configured Appliance to an appropriate Family
that was created after the orphaned appliance was discovered, right-click the
orphaned appliance and select Adopt by First Matching Family. For more
information, see "Using the Adopt by First Matching Family function" on page 19.
Note: The IAACU does not change manually configured network settings of
discovered appliances. If the manually configured IP and Subnet
addresses fit an existing Family, the IAACU will place that appliance into
that Family, but does not change any other settings (such as host name,
DNS, or gateway addresses).
Any discovered appliance that has the same IP address as a previously
discovered appliance will be listed in the Conflicting Network Addresses group.
The IAACU Family Setup window opens.
The Appliance Family Rules determine what purpose an appliance must serve
to be included in the Family. Select one of the following values:
v IBM TotalStorage NAS Appliances
v IBM xSeries 130 and 135
You can use the IAACU to assign network resources for members of this
Family, or you can use a DHCP server to assign network resources.
v To use the IAACU to assign network resources, clear the Use DHCP check
box and fill in the following fields:
Min IP Address
The lowest IP address in a range of IP addresses that can be
assigned to an appliance that is a member of this Family.
Max IP Address
The highest IP address in a range of IP addresses that can be
assigned to an appliance that is a member of this Family.
Subnet Mask
The subnet mask value that will be used by appliances that are
members of this Family.
Default Gateway
The IP address of the default gateway that will be used by appliances
that are members of this Family (optional).