Table of Contents
Advertisement
Figure 4. Battery removal
4. Insert the new battery:
a. Tilt the battery so that you can insert it into the socket, under the battery
clip.
b. As you slide it under the battery clip, press the battery down into the socket.
Figure 5. Battery replacement
5. Reinstall the appliance cover and connect the cables.
Note: Wait approximately 20 seconds after you plug the power cord of the
engine into an electrical outlet for the Power Control button to become
active.
6. Turn on the appliance.
7. Start the Configuration/Setup Utility program and set configuration parameters.
a. Set the system date and time.
b. Set the power-on password.
c. Load setup defaults.
d. Save settings and exit.
e. Restart
Chapter 8. Troubleshooting
95
Advertisement
Table of Contents
Troubleshooting
