Do Not Disturb
Description
Value Range
Default Value
4.7.2.4 Call Forward
Unconditional (Enable Call Forward)
Description
Value Range
Default Value
Unconditional (Phone Number)
Description
Value Range
Default Value
Document Version 2011-11
Selects whether to enable the Do Not Disturb feature for incoming calls.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [No] for this setting.
•
Yes
•
No
No
Selects whether to forward all incoming calls to a specified destination.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
•
Yes
•
No
No
Specifies the phone number of the destination to forward all incoming
calls to.
Max. 32 characters
Note
•
You cannot leave this field empty if [Unconditional (Enable
Call Forward)] is set to [Yes].
Not stored.
Section 4 Web User Interface Programming
Administrator Guide
95