Section 5 Configuration File Programming
Value Range
Default Value
Web User Interface Reference
CFG_FILE_KEY1
Value Format
Description
Value Range
Default Value
130
Administrator Guide
Max. 500 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 128 characters.
–
"<password>" must be less than 128 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<schema>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this URL, it will be replaced with the
unit's firmware version.
•
If this URL ends with "/" (slash), "sip.cfg" is automatically added
at the end of the URL.
For example, CFG_MASTER_FILE_PATH="http://host/
dir/" becomes CFG_MASTER_FILE_PATH="http://
host/dir/sip.cfg".
Empty string
Note
•
The URL specified by your phone system dealer may be preset
in the unit.
Master File URL (Page 104)
String
Specifies the encryption key (password) used to decrypt configuration
files.
Note
•
If the extension of the configuration file is ".e1c", the
configuration file will be decrypted using this key.
32-byte characters
Note
•
If an empty string is set for this parameter, decryption with this
value is disabled.
A unique value is preset to each unit.
Document Version 2011-11