Section 4 Web User Interface Programming
Note
•
If you have changed the default password for the Administrator account and successfully reset the
settings (the message "Complete" is displayed), the next time you access the Web user interface, the
authentication dialog box appears.
4.8.4 Restart
This screen allows you to restart the unit by clicking [Restart]. After you click this button, a dialog box is
displayed, asking whether you want to restart the unit. Click OK to perform a restart, or Cancel not to.
Notice
•
The unit will restart even if it is being accessed through the phone user interface, or on calls.
4.9 Result Messages
When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Result Message
Complete
Failed (Parameter Error)
Failed (Memory Access
Failure)
106
Administrator Guide
Description
The operation has successfully completed.
The operation failed because:
•
Some specified values are out of range
or invalid.
The operation failed because:
•
Access error to the flash memory
occurred while reading or writing the
data.
Applicable Screens
All screens
All screens
All screens
Document Version 2011-11