Tone Timings; Ringing Tone; Tone Frequencies; Stutter Tone - Panasonic KX-UT670 Administrator's Manual

Tone Timings

Description
Value Range
Default Value
Configuration File Reference

4.7.3.3 Ringing Tone

Tone Frequencies

Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference

4.7.3.4 Stutter Tone

Tone Frequencies
Description
Value Range
Document Version 2011-11
Specifies the pattern, in milliseconds, of busy tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
60,500,440
BUSY_TONE_TIMING (Page 149)
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
440,480
RINGBACK_TONE_FRQ (Page 150)
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
60,2000,3940
RINGBACK_TONE_TIMING (Page 150)
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
0, 200–2000 (0: No tone)
Section 4 Web User Interface Programming
Administrator Guide 99