Panasonic KX-UT670 Administrator's Manual page 48

Section 4 Web User Interface Programming
Opening/Closing the Web Port
To access the Web user interface, you must open the unit's Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (® see Introduction).
Configuring Settings from the Unit
To open the unit's Web port
1.
Press
2.
Tap [Network] and then select [Embedded web].
3.
Tap [On].
To close the unit's Web port
1.
Press
2.
Tap [Network] and then select [Embedded web].
3.
Tap [Off].
Configuring Settings from the Web User Interface
To close the unit's Web port
1.
In the Web user interface, click [Web Port Close].
2.
Click [OK].
Note
•
The Web port of the unit will be closed automatically in the following conditions:
–
The port close timer configured through the Web user interface expires (® see [Port Close
Timer] in 4.5.4.1 Web Server Settings).
–
3 consecutive unsuccessful login attempts occur.
•
The Web port can be set to stay open continuously, through Configuration file programming (® see
"HTTPD_PORTOPEN_AUTO" in 5.5.2 HTTP Settings). However, please recognize the possibility of
unauthorized access to the unit by doing so.
Access Levels (IDs and Passwords)
2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
Account
User End users
48 Administrator Guide
on the Home screen, and then tap [Settings].
on the Home screen, and then tap [Settings].
Target User
(default)
user
ID Password
(default)
-blank-
(NULL)
Password Restrictions
•
When logged in as User, you can
change the password for the
User account (® see
4.5.3 Change User Password).
•
The password can consist of 6 to
16 ASCII characters
(case-sensitive) (® see
Entering Characters in
4.2.4 Accessing the Web User
Interface).
Document Version 2011-11