Characters Available For String Values; Configuration File Examples; Examples Of Codec Settings - Panasonic KX-UT670 Administrator's Manual

Phone User Interface Reference
Provides the reference page of the corresponding parameter in phone user interface programming.
Web User Interface Reference
Provides the reference page of the corresponding parameter in Web user interface programming.

5.2.3 Characters Available for String Values

Unless noted otherwise in "Value Range", only ASCII characters can be used for parameter values. Unicode
characters can also be used in some parameter values.
Available ASCII characters are shown on a white background in the following table:

5.3 Configuration File Examples

The following examples of configuration files are provided on the Panasonic Web site (® see Introduction).
•
Simplified Example of the Configuration File
•
Comprehensive Example of the Configuration File

5.3.1 Examples of Codec Settings

Setting the Codec Priority to (1)G.729A, (2)PCMU, (3)G.722
## Codec Settings
# Enable G722
CODEC_ENABLE0_1="Y"
CODEC_PRIORITY0_1="3"
# Disable PCMA
CODEC_ENABLE1_1="N"
# Enable G729A
CODEC_ENABLE3_1="Y"
CODEC_PRIORITY3_1="1"
# Enable PCMU
CODEC_ENABLE4_1="Y"
CODEC_PRIORITY4_1="2"
Document Version 2011-11
Section 5 Configuration File Programming
Administrator Guide 119