Section 3 Phone User Interface Programming
3.1 Phone User Interface Programming
This section provides information about the features that can be configured directly from the unit, but that are
not mentioned in the Operating Instructions.
For details about the other available features, settings and operations on the phone user interface, refer to the
Operating Instructions on the Panasonic Web site (® see Introduction).
3.1.1 Reset Web ID/Password
Reset Web ID/Password resets all the IDs and passwords required for users and administrators to access the
Web user interface (® see Access Levels (IDs and Passwords) in 4.2.3 Before Accessing the Web User
Interface) to their factory defaults. You can perform this operation from the unit.
To perform Reset Web ID/Password
1.
Press
2.
Tap [About phone].
3.
Press and hold
4.
When the keyboard is displayed, enter [#][7][3][9], and then press
5.
Tap [OK] to confirm the reset.
Notice
•
For security reasons, it is recommended that the passwords are set again immediately (® see
4.5.2 Administrator Password or 4.5.3 Change User Password).
3.1.2 Password for the Unit's Administrator Menu
You need a login password to access the [Administration] menu on the unit. In this menu, the administrator
can configure the following settings:
•
Ethernet port settings
•
Import Configuration file
•
Applications
•
Update Firmware
•
Administrator password
Notice
•
You should manage passwords carefully, and change them regularly.
The unit's administrator password is the same as the administrator password for Web user interface
programming and the default is also the same. For details, see Access Levels (IDs and Passwords) in
4.2.3 Before Accessing the Web User Interface.
The password can consist of 6 to 16 ASCII characters (case-sensitive) (® see Entering Characters in
4.2.4 Accessing the Web User Interface).
To access the unit's administrator menu
1.
Press
34
Administrator Guide
on the Home screen, and then tap [Settings].
.
on the Home screen, and then tap [Settings].
.
Document Version 2011-11