Description
Value Range
Default Value
RTP_CLOSE_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
5.7.3 Miscellaneous VoIP Settings
OUTBANDDTMF_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
TELEVENT_PAYLOAD
Value Format
Document Version 2011-11
Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
0
RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, ...,
RTP_CLOSE_ENABLE_6
Boolean
Specifies whether to enable processing to close held RTP sockets.
•
Y (Enable RTP Close)
•
N (Disable RTP Close)
Y
OUTBANDDTMF_1, OUTBANDDTMF_2, ..., OUTBANDDTMF_6
Boolean
Specifies the method for transmitting DTMF tones.
•
Y (Outband [use telephone-event])
•
N (Inband)
Note
•
If set to "Y", DTMF tones will be sent through SDP, compliant
with RFC 2833.
•
If set to "N", DTMF tones will be encoded in the RTP stream.
Y
DTMF Type (Page 86)
Integer
Section 5 Configuration File Programming
Administrator Guide
161