Connection Mode; Dhcp Settings; Host Name - Panasonic KX-UT670 Administrator's Manual

Section 4 Web User Interface Programming
unit using the phone user interface. In addition, if the IP address of the PC from which you try to access
the Web user interface has been changed, close the Web port once by selecting [Off] for [Embedded
web] on the unit (® see Opening/Closing the Web Port in 4.2.3 Before Accessing the Web User
Interface).

4.4.1.1 Connection Mode

Connection Mode
Description
Value Range
Default Value
Phone User Interface
Reference

4.4.1.2 DHCP Settings

Host Name

Description
56 Administrator Guide
Selects whether to assign the IP address automatically (DHCP) or
manually (static).
•
DHCP
•
Static
DHCP
Network Settings (Page 14)
Specifies the host name for the unit to send to the DHCP server.
Note
•
This setting is available only when [Connection Mode] is set
to [DHCP].
Document Version 2011-11