Output Submenu
This submenu allows you to configure the HDMI outputs of the DSC.
Figure 26.
Output Rate — Select this item to specify the output resolution and refresh rate.
•
The DSC HD-HD 4K Plus A Series scalers have a range of resolutions from which
to choose (see the Output Resolutions and Refresh Rates table for the available
settings). The available rates depend on the selected resolution.
Three custom user-defined output rate slots are also available to be defined via
SIS commands or via the
a custom EDID has not been captured from a display device or has not been
uploaded to the unit, these slots default to 720p @ 60 Hz. When a resolution
is applied to a user-defined EDID slot, its name is displayed in the
Resolution
C1: 1280x780 @ 60 Hz (EXT)
of the manufacturer of the EDID).
Output Submenu
Capture Display EDID
panel in the format c
:
n
(the last three letters in parentheses represent the name
item on the
Input
x
@
(
). An example would be
nnnn
nnnn
nn
XXX
DSC HD-HD 4K Plus A Series • Operation
menu. If
Output
28