Output Submenu — Dsc 3G-Hd A - Extron electronics DSC 3G-HD A User Manual

Film Mode — This option lets you enable and disable Film Mode. After selecting the
•
option, press any arrow button to toggle between
If is selected, the DSC detects:
Auto
3:2 pull-down for NTSC and 1080i @ 60 Hz
•
2:2 and 24:1 pull-down for PAL and 1080i @ 50 Hz
•
Active — This view-only field shows the width in pixels (the
•
lines (the value) of the active video area.
V
• Total — This view-only field shows the width in pixels (the
lines (the value) of the total video display area.
V
• Start — This view-only field shows the distance in pixels from the left edge of the
total video display to the left edge of its active area (
from the top edge of the total video display to the top edge of its active area.
Output Submenu — DSC 3G-HD A
This submenu allows you to configure the output of the DSC 3G-HD A.
NOTE: The DSC 3G-HD A has some different options on this submenu from
DSC HD-3G A (see Output Submenu — DSC HD-3G A
Figure 20. Output Submenu — DSC 3G-HD A
• Output Resolution — This option lets you select the resolution and refresh rate
for the connected output display. The DSC 3G-HD A has a range resolutions from
which to choose (see the
table on the next page for the settings that are available for this model). The available
refresh rates depend on the selected resolution.
1. Select
Output Resolution
2. Press the t or  button to select a resolution.
Auto
H
Resolutions and Refresh Rates for the DSC 3G-HD A
from the submenu.
Output
DSC 3G-HD A and DSC HD-3G A • Operation
(the default) and .
Off
value) and the height in
H
value) and the height in
H
value) and the distance in lines
on page 27).
25