Table of Contents
Advertisement
Output Submenu
This submenu allows you to configure the HDMI output of the DSC.
Figure 17.
•
Output Rate — Specifies the output resolution and refresh rate. The DSC 401 and
401 A scalers have a range of resolutions from which to choose (see the
resolutions and refresh rates
available rates depend on the selected resolution.
Three custom user-defined output rate slots are also available to be defined via the
uploaded EDID or via the Capture Display EDID item on the Input menu. If a custom
EDID has not been captured from a display device or has not been uploaded to the unit,
these slots default to 1920x1080 (1080p) @ 60 Hz.
When a resolution is applied to a user-defined EDID slot, its name is displayed in the
Output Resolution panel in the format cn: nnnnxnnnn @ nn (XXX). An example
would be C1: 1280x780 @ 60 Hz (EXT) (the last three letters in parentheses represent
the name of the manufacturer of the EDID data).
Output Submenu
table on the next page for the available settings). The
DSC 401 and DSC 401 A User Guide • Operation
Output
23
Advertisement
Table of Contents
