Copyright Information; Dsc-Initiated Messages - Extron electronics DSC HD-HD 4K Plus A Series User Manual

Hdmi to hdmi 4k scalers
Hide thumbs Also See for DSC HD-HD 4K Plus A Series:
Table of Contents

Advertisement

Copyright Information

The DSC sends the following copyright message if power is cycled while the DSC
is connected to the host. It displays on the computer screen only with an RS-232
connection.
]
(c) Copyright 20nn, Extron Electronics, DSC HD-HD 4K Plus A
60-1573-0n
Www, DD Mmm YYYY hh:mm:ss
(Where
20nn
and
is the day of the week.)
Www

DSC-initiated Messages

When a local event such as a front panel selection or adjustment takes place, the
DSC responds by sending a message to the host. No response is required from the host.
Examples of DSC-initiated messages are listed below.
Reconfig
The DSC sends this response when a change in the input frequency is detected.
HplgO
The DSC sends this response when hot plug event X6( is detected on output X@ , for
example, when an HDMI output is unplugged and reconnected.
X@ = Output. For X@ :
X6( = Hot plug change. For X6( :
• X6! ]
In00
(Non-xi model) The DSC sends this response when a change in input signal presence
occurs.
X6! = Video signal status. For X6! :
= video signal not detected
0
• X6!
In00
(xi model) The DSC sends this response when a change in input signal presence
occurs on input A or B.
X6! = Video signal status (INA
= video signal not detected
0
Hdcp I
The DSC sends this response when a change in HDCP status of input X! occurs.
X4$ = HDCP status. For X4$ :
= No source detected
0
= Source detected but no HDCP is present
1
= Source detected with HDCP
2
Hdcp O
The DSC sends this response when a change in HDCP status of output X@ occurs.
X4$ = HDCP status. For X4$ :
= No sink detected
0
= Sink detected but no HDCP is present
1
= Sink detected with HDCP
2
Psav9
The DSC sends this response when it enters power save mode due to the unit
exceeding its maximum operating temperature.
]
]
is the year,
is the firmware version,
Vn.nn
]
X@
X6( ]
*
= HDMI A
1
1
X6! ]
*
INB). For X6! :
*
X!
X4$ ]
*
X@
X4$ ]
*
]
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
60-1573-0n
= HDMI B (xi model only)
2
= New sink connected
= video signal detected
1
= video signal detected
1
[
]
xi
, Vn.nn,
is the model number,
= Sink disconnected
2
43

Advertisement

Table of Contents
loading

Table of Contents