Table of Contents
Advertisement
Operation
This section discusses the functions available through the front panel and the on-screen
display (OSD) to configure and operate the DSC. Topics include:
•
•
•
•
•
•
•
•
Front Panel Features
A A B B
A
B
C
Figure 18.
NOTE: Figure 18 shows the front panel of the xi model. The front panel of the non-xi
A
B
Front Panel Features
On-screen Display Menu
Auto-Image
Changing the Output Resolution and Refresh Rate
Power Save Mode
Presets
Locking the Front Panel (Executive Mode)
Resetting
CONFIG
Status LED (power and signal)
Config port
Input signal LEDs
DSC HD-HD 4K Plus A xi Front Panel
model is identical except for the product name in the upper-right corner.
Status LED (power and signal) — This bicolor LED lights steadily amber when
the unit is powered on but no signal is present, blinks amber every 3 seconds when
the unit is in standby mode, and lights steadily green when both power and an input
video signal are present.
USB configuration port — Connect a computer to this USB mini-B port for device
configuration and firmware upgrades.
MENU
INPUT
OUTPUT
SIGNAL
SIGNAL
HDCP
HDCP
AUDIO
AUDIO
ENTER
C C
D D
E E
Output signal LEDs
D
Menu and Enter Buttons
E
Navigation Buttons
F
DSC HD-HD 4K Plus A Series • Operation
DSC HD-HD 4K Plus A xi
AUTO-
IMAGE
HOLD
FOR XGA/720p
F F
18
Advertisement
Table of Contents
