Maintenance; Date - Time 1000; Flow Temp. (Flow Temperature Control) 2000; Temp. Min. (Flow Temp. Limit, Min.) 2177 - Danfoss ECL Comfort 110 Operating Manual

Maintenance

2 sec.
Enter the maintenance menus.
Date - time
It is only necessary to set the correct date and time in connection with the first use of the
ECL Comfort 110 controller or after a power break of more than 36 hours (see the chapter on
Adapting the ECL Comfort 110 controller).
Flow temp. (flow temperature control)
Temp. min. (flow temp. limit, min.)
Set the allowed min. flow temperature for your system. Adjust the factory setting, if
required.
Temp. max. (flow temp. limit, max.)
Set the allowed max. flow temperature for your system. Adjust the factory setting, if
required.
The setting for 'Temp. max.' has higher priority than 'Temp. min.'.
10 | © Danfoss | 2020.12
Setting range
-20 ... 110 °C
Setting range
10 ... 150 °C
1000
2000
2177
Factory setting
10 °C
2178
Factory setting
90 °C
AQ188586469032en-010701