Temperature Monitoring Screen (S1); Programmable Screen (S2); Average Current (S3); Current Monitoring Screen (S4) - Danfoss mcd-500 Operating Instruction

MCD 500 Operating Instruction

6.4.1 Temperature Monitoring Screen (S1)

The temperature screen shows the temperature of the motor as a percentage of total thermal capacity, and also shows which motor data set is in use.
The temperature monitoring screen is the default status screen.
Ready
MS1 000.0A
Primary Motor Set
M1 000%

6.4.2 Programmable Screen (S2)

The MCD 500's user-programmable screen can be configured to show the most important information for the particular application. Use parameters 8-2
to 8-5 to select which information to display.
Ready
MS1 000.0A
-.-- pf
00000 hrs

6.4.3 Average Current (S3)

The average current screen shows the average current of all three phases.
Ready
MS1 000.0A

6.4.4 Current Monitoring Screen (S4)

The current screen shows real-time line current on each phase.
Ready
MS1 000.0A
Phase currents
000.0A 000.0A

6.4.5 Frequency Monitoring Screen (S5)

The frequency screen shows the mains frequency as measured by the soft starter.
Ready
MS1 000.0A
00.0Hz
S1
000.0kW
S2
000.0kW
S3
000.0kW
0.0A
S4
000.0kW
000.0A
S5
000.0kW
MG.17.K2.02 - VLT ® is a registered Danfoss trademark
6 Operation
6
51