Figure 4-4 Configuring A Password Prompt Question For Resetting A Password - Zte ZXR10 ZSR V2 Configuration Manual (System Management

ZXR10 ZSR V2 Configuration Guide (System Management)

Figure 4-4 Configuring a Password Prompt Question for Resetting a Password

Configuration Flow
1. Configure an authentication template.
2. Configure an authorization template.
3. Create a user.
4. Configure a password prompt question and an answer.
5. Log in for password recovery.
Configuration Commands
Run the following commands on the ZXR10 ZSR V2:
R1(config)#aaa-authentication-template 2001
R1(config-aaa-authen-template)#aaa-authentication-type local
R1(config-aaa-authen-template)#exit
R1(config)#aaa-authorization-template 2001
R1(config-aaa-author-template)#aaa-authorization-type none
R1(config-aaa-author-template)#exit
R1(config)#system-user
R1(config-system-user)#authentication-template 1
R1(config-system-user-authen-temp)#bind aaa-authentication-template 2001
R1(config-system-user-authen-temp)#exit
R1(config-system-user)#authorization-template 1
R1(config-system-user-author-temp)#bind aaa-authorization-template 2001
R1(config-system-user-author-temp)#local-privilege-level 15
R1(config-system-user-author-temp)#exit
R1(config-system-user)#user-name who
R1(config-system-user-username)#bind authentication-template 1
R1(config-system-user-username)#bind authorization-templat 1
R1(config-system-user-username)#password who
R1(config-system-user-username)#password-recover-remind
password is:***
question: who are you
answer:who
R1(config-system-user-username)#
/*Log in to the R1 through Telnet. Use the password prompt
question to reset the password.*/
4-12
SJ-20140504150128-007|2014-05-10 (R1.0) ZTE Proprietary and Confidential