Zte ZXR10 ZSR V2 Configuration Manual (System Management page 69

5. Set the types of Trap and Inform messages that are allowed to be sent.
Command
ZXR10(config)#
[<notification-type>]
ZXR10(config)#
[<notification-type>]
6. Set the Trap destination host.
Command
ZXR10(config)#
<vrf-name>]<ip-address>{Trap | inform} version {1 | 2c | 3
{auth | noauth | priv}}<community-name/user>[udp-port
<udp-port>][<Trap-type>]
vrf <vrf-name>:
<ip-address>: defines the IP address of a host. IPv4 and IPv6 are supported.
Trap | inform: specifies sending Trap messages or notifications to a host.
version 1 | 2c | 3 : the SNMP version (v1, v2c, or v3).
auth: The packets to be sent are authenticated but not encrypted.
noauth: The packets to be sent are not authenticated or encrypted.
priv: The packets to be sent are authenticated and encrypted.
<community-name/user-name>: community name string of SNMP v1/v2 or SNMPv3 user
name, range: 1–32 characters.
udp-port <udp-port>: number of the UDP port for sending Trap or inform messages,
range: 1–65535.
<Trap-type>: Trap or Inform type. The Trap type can be all or one of the bgp, ospf,
rmon, snmp, stalarm and vpn types.
7. Enable the system log function.
SJ-20140504150128-007|2014-05-10 (R1.0)
snmp-server enable inform
snmp-server enable Trap
snmp-server host [ vrf
VRF name, range: 1–31 characters.
6-3
Chapter 6 SNMP Configuration
Function
Enables the agent to send notifications
and sets the types of notifications to
be sent.
The notification types can be all or one
of the bgp, ospf, rmon, snmp, stalarm
and vpn types.
Enables the agent to send Trap
messages and sets the types of Trap
messages to be sent.
The Trap message types can be all
or one of the bgp, ospf, rmon, snmp,
stalarm and vpn types.
Function
Configures the destination for receiving
SNMP notifications. The snmp-server
host command needs to be used
together with the snmp-server enable
command.
ZTE Proprietary and Confidential