Zte ZXR10 ZSR V2 Configuration Manual (System Management page 120

ZXR10 ZSR V2 Configuration Guide (System Management)
2. Creates a flow record policy, and sets key and non-key fields.
Step
1
2
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
flow record <record-name>
ZXR10(config)#
ZXR10(config-flow-record)#
{destination-address | source-address}
ZXR10(config-flow-record)#
{direction|sample-rate}
ZXR10(config-flow-record)#
{input | output}
ZXR10(config-flow-record)#
{[destination address | address-prefix
minimum-mask <len>]|[source address |
address-prefix minimum-mask <len>]}
ZXR10(config-flow-record)#
–
stack section <1
5>
ZXR10(config-flow-record)#
as-number {destination | source | next-adjacent |
prev-adjacent}| next-hop-address {ipv4 | ipv6}}
ZXR10(config-flow-record)#
{destination-port |icmp {ipv4 | ipv6}{type | code}|
source-port | tcp flags}
ZXR10(config-flow-record)#
protocol | version}
ZXR10(config-flow-record)#
{[destination address | address-prefix
minimum-mask <len>]|[source address |
address-prefix minimum-mask <len>]| flow-label}
match datalink mac
match flow
match interface
match ipv4
match mpls label
match routing {bgp
match transport
match ip {cos |
match ipv6
12-4
ZTE Proprietary and Confidential
Function
Creates a flow record policy,
and names the policy. You can
configure up to 100 different flow
record policies. Range of the
policy name: 1–32 characters.
Sets the source Medium Access
Control (MAC) address or
destination MAC address as a
key field.
Sets flow direction or sampling
rate as a key field.
Sets input interface index or
output interface index as a key
field.
Sets IPv4 information as a key
field.
Sets MPLS information as a key
field.
–
<1 5>: Sets the collection label
to the layer 1, 2, 3, 4, or 5 label.
Sets the related route next hop
information as a key field.
Sets transport layer information
as a key field.
icmp {ipv4 | ipv6} {type | code}:
sets the type field of Internet
Control Message Protocol
(ICMP) packets as a collection
field. The field value is ICMP
Type * 256 + ICMP code.
Sets IP information as a key field.
Sets IPv6 information as a key
field. Range of len: 1–128.