Zte ZXR10 ZSR V2 Configuration Manual (System Management page 64

ZXR10 ZSR V2 Configuration Guide (System Management)
privilege
Raise ZTE_B's privilege level to level 8, as shown below:
Username:ZTE_B
Password:
ZXR10#show privilege
Current privilege level is 5
/*Indicates that the privilege level of ZTE_B is 5.*/
ZXR10#enable 8
Password:
ZXR10#show privilege
Current privilege level is 8
/*Indicates that the privilege level of ZTE_B has been raised to 8.*/
ZXR10#configure terminal
Enter configuration commands, one per line.
ZXR10(config)#?
Configure commands:
clock
/*Indicates that the clock command has been added to the commands that ZTE_B can use.*/
end
exit
ping
ping6
show
trace
trace6
ZXR10(config)#clock ?
timezone
View the configurations on the ZXR10 ZSR V2, as shown below:
ZXR10#enable
Password:
ZXR10#show running-config adm-mgr
! <ADM_MGR>
enable secret level 8 5 52ZJX4aBmmYKbWdVFpSvwg==
system-user
authentication-template 1
bind aaa-authentication-template 2001
$
authentication-template 2
bind aaa-authentication-template 2002
$
authorization-template 1
bind aaa-authorization-template 2001
SJ-20140504150128-007|2014-05-10 (R1.0)
Show current privilege level
Configure board clock
Exit from configure mode
Exit from configure mode
Send echo messages
Send IPv6 echo messages
Show running system information
Trace route to destination
Trace route to destination using IPv6
Configure time zone
/*Raises the user's privilege level to the default level, level 15.*/
/*The input password is not displayed.*/
End with CTRL/Z.
5-6
ZTE Proprietary and Confidential