User Management Configuration Examples; Local Authentication And Authorization User Configuration Example; Example; Figure 4-1 Local Authentication And Authorization Configuration - Zte ZXR10 ZSR V2 Configuration Manual (System Management

eg4:
ZXR10(config-system-user)#user-password recover-remind zte
password is:***
question:what is your name
answer:zte 01234567890123456789012345678901234567890123456
%Error 59960: Answer has been to upper limit!The limit is 50 characters!
ZXR10(config-system-user)#
Descriptions of the command output:
Command Output
password is:
question:
answer:

4.3 User Management Configuration Examples

4.3.1 Local Authentication and Authorization User Configuration

Example

Configuration Description
As shown in
mode and creates a user who uses local authentication mode.

Figure 4-1 Local Authentication and Authorization Configuration

SJ-20140504150128-007|2014-05-10 (R1.0)
Description
Requires the input of the password corresponding to the user name. A
clear text password consists of 3–32 characters, and is displayed as
***. If the password is correct, continues to run the command. If the
password is incorrect, displays an error, and ends the command.
Requires the input of a prompt question for password recovery. The
question can consist of a maximum of 50 characters including spaces,
but cannot exclusively consist of spaces or include any question mark.
If the question has more than 50 characters, displays an error prompt.
If the question is normal, continues to run the command.
Requires the input of an answer for password recovery. The answer
can consist of a maximum of 50 characters including spaces, but
cannot exclusively consist of spaces or include any question mark. If
the answer has more than 50 characters, displays an error prompt. If
the answer is normal, continues to run the command.
Figure 4-1, PC logs in to the router by serial port or Telnet, enters configuration
4-7
ZTE Proprietary and Confidential
Chapter 4 User Management