Zte ZXR10 ZSR V2 Configuration Manual (System Management page 68

ZXR10 ZSR V2 Configuration Guide (System Management)
Command
ZXR10(config)#
enable
2. Configure an SNMP packet community.
Command
ZXR10(config)#
<encrypted-para>|<unencrypted-para>[showclear]}[view
<view-name>][{ro | rw}][{[ipv4-access-list
<ipv4_acl_name>],[ipv6-access-list <ipv6_acl_name>]}]
<encrypted-para>: cipher text community string, 64 characters.
<unencrypted-para>: clear text community string, range: 1–32 characters.
showclear: If this parameter is configured, the community string is displayed in clear
text. If not, the community string is displayed in cipher text.
<view-name>: view name, range: 1–32 characters.
ro | rw: The ro parameter indicates only reading a
indicates reading and writing a MIB object.
3. Define an SNMP view.
Command
ZXR10(config)#
e-id>{included | excluded}
<subtree-id>: specifies the MIB sub-tree ID or node name of the MIB sub-tree for the
view name. Range: 1–79 characters.
included | excluded: The sub-tree is included or excluded.
4. Set MIB object information.
Command
ZXR10(config)#
ZXR10(config)#
SJ-20140504150128-007|2014-05-10 (R1.0)
snmp-server version {v1 | v2c | v3}
snmp-server community {encrypted
snmp-server view <view-name><subtre
contact <mib-syscontact-text>
location <mib-syslocation-text>
6-2
Function
Enables SNMP V1, V2, and V3 for
receiving packets from and sending
packets to clients.
There are two states: enable and
disable. Default: disable.
Function
Configures an SNMP packet
community string.
MIB object. The rw parameter
Function
Defines an SNMP view.
Function
Configures the contact method of the
person who is in charge of the MIB
object. Range: not longer than 200
characters.
Configures the description of the MIB
object system location. Range: not
longer than 200 characters.
ZTE Proprietary and Confidential