Sftp Connection Configration; Configuring The Zxr10 Zsr V2 As An Sftp Server; Figure 1-13 Sftp Server Configuration Example - Zte ZXR10 ZSR V2 Configuration Manual (System Management

1.7 SFTP Connection Configration

1.7.1 Configuring the ZXR10 ZSR V2 as an SFTP Server

This procedure describes how to configure the ZXR10 ZSR V2 as an SFTP server.
Prerequisite
The local terminal can access the remote router network.
Steps
1. Configure an SFTP server.
Command
ZXR10(config)#
For how to configure a login user name and password of an SFTP server, refer to
"Chapter 4 User Management".
2. Verify the configurations.
Command
ZXR10#
– End of Steps –
Example
The following gives an example of how to configure an SFTP server.
l
Configuration Description
When the ZXR10 ZSR V2 functions as an SFTP server, the client can be a PC or
another type of device that supports the SFTP client function. Two ZXR10 ZSR V2s
are connected, one functioning as an SFTP server, the other as an SFTP client that
downloads files from the server, see

Figure 1-13 SFTP Server Configuration Example

l
Configuration Flow
1. On the SFTP server, enable the SSH function, and configure a listening port.
SJ-20140504150128-007|2014-05-10 (R1.0)
sftp-server top-directory <directory>
show sftp-server
Chapter 1 Device Connection management
Function
Sets the top-level directory that the
SFTP server allows users access.
Function
Displays configuration information on
the SFTP server.
Figure 1-13.
1-17
ZTE Proprietary and Confidential