Zte ZXR10 ZSR V2 Configuration Manual (System Management page 73

Intelligent integrated multi-service router
Hide thumbs Also See for ZXR10 ZSR V2:
Table of Contents

Advertisement

Configuration Flow
1. Configure an SNMP packet community string. SNMPv1/v2c uses community string
authentication mode. An SNMP community string is named with a character string,
and has an access privilege (read-only or read-write).
2. Designate a view name to the configured community string. Designate the default view
to the community string if the view parameter is not configured. Designate the default
privilege (ro) to the community string, if the parameter ro | rw is not configured. Users
can only perform operations in the permitted view range, whether ro or rw is specified.
3. Configure alarm Trap. Configure the types of Trap messages to be sent and the
destination host. Trap messages are actively sent by managed devices to NMS. They
are used to report urgent and important events. By default, all types of Trap messages
are sent.
Configuration Commands
Ran the following commands on the ZXR10 ZSR V2:
R1(config)#snmp-server version v2c enable
R1(config)#location No.68 Zijinghua Rd. Yuhuatai District, Nanjing, China
R1(config)#contact +86-25-52870000
R1(config)#snmp-server packetsize 1400
R1(config)#snmp-server engine-id 830900020300010289d64401
R1(config)#snmp-server community public view AllView ro
R1(config)#snmp-server host 61.139.48.18 inform version 2c public udp-port 162 snmp
R1(config)#snmp-server host 61.139.48.18 Trap version 2c public udp-port 162
R1(config)#snmp-server enable Trap
R1(config)#snmp-server enable inform
R1(config)#logging on
R1(config)#logging Trap-enable warnings
Configuration Verification
Run the show command to check the configurations. The execution result is displayed as
follows.
R1(config)#show snmp config
snmp-server community encrypted
d6ddeaa4dab74523b246fe346c94c31ae58b79ad4776396438ea1e9bb01a9ef3
view AllView ro
snmp-server enable inform snmp
snmp-server enable inform bgp
snmp-server enable inform mac
snmp-server enable inform ospf
snmp-server enable inform stp
snmp-server enable inform ppp
snmp-server enable inform arp
SJ-20140504150128-007|2014-05-10 (R1.0)
6-7
ZTE Proprietary and Confidential
Chapter 6 SNMP Configuration

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents