How To Process [Received] Mail - Neopost IN-600 User Manual

| Page 59 | Nov-12-2015 10:25 |
Processing [Received] Mail
To run mail, follow the procedure below after you have completed the steps in
[Received] Mode printing

How to Process [Received] Mail

On the [Received] home screen:
1. Press . System motors start running.
2. Insert the mail piece into the mail path against the rear-guide wall, side to be printed
facing upwards.
The Mailing System applies the imprint and the mail piece is sent to the catch tray.
on page 57.
How to Set
3
59