Waas Configuration Examples; Predefined Waas Policy Configuration Example - HP FlexNetwork MSR2003 Configuration Manual

Task
devices in standalone mode).
Display DRE statistics (distributed
devices in standalone mode/centralized
devices in IRF mode).
Display DRE statistics (distributed
devices in IRF mode).
Display the global WAAS status.
Display autodiscovered blacklist
information (centralized devices in
standalone mode).
Display autodiscovered blacklist
information (distributed devices in
standalone mode/centralized devices in
IRF mode).
Display autodiscovered blacklist
information (distributed devices in IRF
mode).
Clear the DRE data dictionary.
Clear DRE statistics.
Clear all blacklist entries.

WAAS configuration examples

Predefined WAAS policy configuration example

Network requirements
As shown in
The host downloads data from the server. Examine the optimization effect by comparing DRE
statistics for the first download and second download.
•
For the first download, both WAAS devices need to create data dictionary entries and Router A
sends both indexes and metadata.
•
For the second download, Router A replaces repeated data with indexes.
Figure 153, apply the predefined WAAS policy on Router A and Router B.
Command
display waas statistics dre [ peer-id peer-id ] [ slot
slot-number ]
display waas statistics dre [ peer-id peer-id ] [ chassis
chassis-number slot slot-number ]
display waas status
display waas tfo auto-discovery blacklist { ipv4 | ipv6 }
display waas tfo auto-discovery blacklist { ipv4 | ipv6 } [ slot
slot-number ]
display waas tfo auto-discovery blacklist { ipv4 | ipv6 }
[ chassis chassis-number slot slot-number ]
reset waas cache dre [ peer-id peer-id ]
reset waas statistics dre [ peer-id peer-id ]
reset waas tfo auto-discovery blacklist
423