NAC Image Technology SP-642 User Manual page 99

・
"Playback Parameters" Items
(ID, Current Frame, Segments, Comments, Black Balance settings.
Other items are for display only.)
ID
TYPE
Nickname
Status
Current Frame
Seg
Scene No.
Frame Rate
Frame Size
Blocks
Recording Trigger Mode Recording trigger mode setting
Shutter
Sensor Gain
AOI
Image Trigger
AE
AE CYCLE
Comments
DRES Mode
Exposure Timing
Pixel Bit Length
Black Balance
Camera Synchronization
Exposure phase
Variable frame rate ON/OFF setting for variable recording speed function.
Speed Ratio
(00292)H
"Playback Parameters"
Playback Parameters (HX camera connection) 1
Playback Parameters (HX camera connection) 2
Camera (DRP) ID
Camera (DRP) model
Camera (DRP) nickname (refer to page 4-2)
Camera status
Current frame
Segment number
Scene number
Recording frame rate
Recording frame size
Number of blocks for recording
Shutter speed
Sensor gain setting
Automatic exposure or image trigger range
Image Trigger setting
Automatic exposure setting
Automatic exposure cycle
Recording comments. Input setting up to 100 ASCII characters.
The three characters of [¥]["]['] and all Japanese characters cannot be
used. Characters can be copied and pasted, with the exception of the
characters given above.
Dynamic range expansion shutter mode.
Exposure timing setting
Pixel bit length setting
Black Balance ON/OFF
EST setting during recording
Exposure phase shift setting
Low/high speed ratio for high recording speed when the variable recording
speed function is used.
4 - 23