Camera Configuration Mode Settings - NAC Image Technology SP-642 User Manual

10.5 GX-5 Camera Configuration Mode Settings
Switches the GX-5 camera configuration mode settings. Select any of the following camera
configuration modes.
Set Manually
Set Automatically Performed automatically if the camera configuration settings and the
If the camera configuration mode is "Set Automatically", save the recorded data
before turning off the DRP power even if there is a backup.
If the camera head cannot be verified at DRP startup due to a malfunction of the
Caution
camera head contacts or such, the image data performed with the camera
configuration settings will be lost.
(00292)H
Change the camera configuration settings with the HXLink or the J-PAD3.
configuration of the camera head connected to the GX-5 DRP differ at
GX-5/GX-5F DRP.
Confirm that the GX-5/GX-5F cameras with the settings
have started up and the PC and cameras have connected to
the network. Additionally, confirm that the camera is not in
use.
Startup the HX Utility and click "Camera configuration
mode setting".
The " Select Camera" dialogue is displayed with a list of the
GX-5/GX-5F cameras currently connected to the network.
An "x" is shown on the camera icon for the cameras in use.
Check a camera to set and click "OK".
The "Camera Configuration Mode Settings" dialogue
appears. Select the camera configuration mode.
A confirmation dialogue appears when the camera
configuration mode is changed.
Click "Yes" to change the camera configuration data and
restart the GX-5/GX-5F DRP.
10 - 9