Update J-Pad3 Firmware - NAC Image Technology SP-642 User Manual

10.7 Update J-PAD3 Firmware

Updates the firmware for the remote control (J-PAD3) connected to the GX camera.
Make sure to turn off the camera power and unplug the J-PAD3 from the GX camera
when updating J-PAD3 firmware.
If not properly updated, the J-PAD3 will not startup and cannot be used.
Caution
First, select the firmware file according to the following procedure.
(00292)H
Startup the HXUtility and click "Select JPAD3 Firmware
Update File".
The
displayed, so specify the firmware
file and click "Open".
"Open File" dialogue is
10 - 11