Set Frame Number - NAC Image Technology SP-642 User Manual

With BURST or LINEAR recorded files, the Set T=0 / Reset T=0/ Frame number cannot be
performed. With BURST or LINEAR recorded files, if Set T=0/ Reset T=0/ Frame number is
performed, the following warnings are displayed.
When multiple files are open and Set T=0 / Reset T=0/ Frame number setting is performed, if
there is a BURST or LINEAR recorded file, the following warnings are displayed. Click the
buttons as directed in the messages.

■ Set Frame Number

The current frame number can be changed.
Click "Set Frame Number" in the file "Control" menu to open the "Set Frame Number" dialogue
and set the frame number.
In "Set Frame Numbers for All Files, All Blocks", if setting frame numbers for files with different
frame rates, the current frame for the file displayed and the time difference for the trigger frame are
newly set so all of the blocks of all of the files opened reflect the frame number and trigger frame
time difference.
Set frame number has the same limitations as Set T=0.
Set frame number cannot be performed on BURST/LINEAR recorded MCFF files.
fx series camera recorded files (MCFF) must be MCFF converted.
Set frame number cannot be performed on ci series camera recorded files (CIF, MCFF).
5 - 10 (00292)H