Superimpose Image - NAC Image Technology SP-642 User Manual

■"Superimpose Information" on the "Item Toolbar" (Basic Mode only)
When using the "Basic Mode", if "Superimpose Information" on the "Item Toolbar" is pressed,
select "All" in "Select Superimpose Information" to enable "Recording Comments".
To cancel, select "None" in "Select Superimpose Information" to disable "Recording Comments".

■ Superimpose Image

Specify the image to be superimposed in the "Conversion Settings" menu.
Items related to "Superimpose Image" in the "Conversion Settings" menu.
Superimpose Image
Select File to Superimpose Image
Superimposed Image Size
Select the superimposed image size that corresponds to the image size.
Small
Medium
Large
Actual Size
Superimposed Image Position
(00292)H
Check to superimpose the image for the specified file on
the converted image.
Select the image file (BMP, JPG) to be superimposed on
the converted image.
Click to display the "Open File" dialogue, select the file
to be used and then click "OK".
Enlarges/reduces the width of the superimposed image to
about 80 pixels.
Enlarges/reduces the width of the superimposed image to
about 120 pixels.
Enlarges/reduces the width of the superimposed image to
about 180 pixels.
Superimposes without
superimposed image.
Select the superimposed
superimposed on the converted image.
Upper Left/Lower Left/Upper Right/Lower Right
enlarging/reducing
image position to
5 - 23
the
be