NAC Image Technology SP-642 User Manual page 334

If using Windows Vista/7 and the save folder under the folder where access is protected
is specified, the batch conversion destination file is created in a different folder than the
save folder. This is operated by the Windows Vista/7 file system function.
【Access protected folder】
Caution
For example, if the save folder is set to the C:¥Program Files¥nac¥MEMRECAM¥hxData folder,
the conversion file is created in the following folder. (User_name replaced with a log on user
name)
【Windows Vista/7 32bit】
C:¥Users¥User_name¥AppData¥Local¥VirtualStore¥Program Files¥NAC¥MEMRECAM¥hxData
【Windows Vista/7 64bit】
C:¥Users¥User_name¥AppData¥Local¥VirtualStore¥Program Files (x86)¥nac¥MEMRECAM
¥hxData
If the format conversion fails, the error details are displayed in the list in "Error
Information".
Refer to 11.4 Error Information on page 11-9 for specifics on the error details.
If the format conversion is successful, the converted batch conversion settings files are
moved to the completed folder (created if none exists) in the "Source Conversion Settings
File Folder".
If the format conversion fails, the converted batch conversion settings files are moved to the
error folder (created if none exists) in the "Source Conversion Settings File Folder".
The history of the format conversion results is saved in the log file of the log folder.
11 - 8
,
C:¥Program Files C:¥Winodws
, or
C:¥ProgramData
(00292)H