NAC Image Technology SP-642 User Manual page 344

The "GX Auto Pilot Command Editor" window appears.
The auto pilot sequence created is shown in the "Sequence List".
Commands given in the auto pilot sequence are shown in the "Command List".
Select a command from the "Command List" and the auto pilot sequence is created by adding to
the "Sequence List" in the "Sequence Editor Button".
Select a command from the "Command List" and the parameters for the selected command are
shown in "Select Parameter Arguments", and a description of the command selected is shown in
"Description of Command" and "Description of Parameters".
Save the created auto pilot sequence in a file in the "Sequence List" with
sequence file into the "Sequence List" with
.
(2 ) First, decide on the location where the auto pilot sequence file is to be saved.
Click
Specify the save folder for the sequence file in "GX Auto Pilot Command File (PC) Save Folder".
Specify the save folder for the sequence execution file in "GX Auto Pilot Command File (DRP)
Save Folder USB".
12 - 4
Sequence List
Sequence Editing
to set the save folder with the following dialogue.
Command
List
Button
. Specify the file save location with
Click
with
dialogue.
Click
folder.
Description of
Command
Select Parameter
Arguments
Description of
Parameters
. Load the
to select the folder
"Reference
the
to set the save
(00292)H
Folder"