Ballast Weights; Rear Wheel Weights; Bottom Weights; Front Weights - Zetor FORTERRA HSX 120 Operator's Manual

Ballast weights are necessary to additionally load the tractor axles and to ensure manoeuvrability and
stability of the tractor.

*Rear wheel weights

Combination Mass of weights
of weights (kg)
(pcs)
2+6 2x25 + 6x30
2+10 2x25 + 10x30
2+14 2x25 + 14x30

Bottom weights

Combination Mass of weights
of weights (kg)
(pcs)
2 2x34
They are installed in case the tractor is not equipped with
the front PTO into the frame tub casting cavity with screws
that are accessible after removal of the battery holder.

*Front weights

Combination Mass of weights
of weights (kg)
(pcs)
3+3 6x50
5+5 10x50
7+7 14x50
The front weights of the can type are suspended in the
tool carrier. They are protected from lateral movement
with a pin inserted between the central weights. The other
weights are attached to the central ones with two clamps.
Note: After the insertion of the pin the front weights and
the weight carrier can be used as the front hook for
emergency towing of a sunken tractor.

BALLAST WEIGHTS

230
350
470
68
300
500
700
FHD20S5N045
FHD20S5N047
FCL20S5034
169