Assembling The Instrument - TESTO 6681 Instruction Manual

1.3.2 Assembling the instrument

1.3.2.1 Wall mounting
(for testo 6611/6613/6614/6615/6617 probes)
 Attaching rear panel bracket
1 Remove locking screw (item (4) of drawing on page 21) and
detach rear panel bracket from plastic bracket (item (2) of drawing
on page 21).
2 Hold rear panel bracket in assembly position and mark the three
drill holes.
3 Drill three holes ( 5 mm) and insert dowels where necessary.
4 Screw on rear panel bracket.
Remember that the clamping brackets (1) must face the wall.
testo 6681 Ethernet
- 1.3 Commissioning 21