1.4.2 Key cover
To prevent unauthorized operation of the keys, the standard key frame can
be replaced with a key cover.
If the key cover has been assembled, the service flap must be opened for
operation (see Section Opening the instrument, chapter 1.3.3, page 24).
Attaching the key cover
The service flap is open, see Opening the instrument, chapter 1.3.3,
page 24.
1
Undo screws (3) and remove key frame (2).
2
Insert key cover (1) into service flap and tighten screws (3).
3
Close and screw down the service flap.
testo 6681 Ethernet
- 1.4 Operation 69