TESTO 6681 Instruction Manual page 42

testo 6681 Ethernet
42

Alarm messages (testo 6681)

Service hour counter (testo 6681 and probe)
as well as the reading and writing of the:

Adjustment data (testo 6681)

Configuration data of analog outputs (testo 6681)

Configuration data of relays (testo 6681)

User settings (testo 6681)
XML codes (download)
The table of xml codes is available for download at
www.testo.com/download-center (registration required)
URL
/data/getserialnumber
/data/getidentification
/data/getversion
/data/getfirmwaredate
/data/getonlinevalue
/data/getviewchannels
/data/getstatus
/data/getlaststatusmessage
/config/gethourscount
/config/getusersettings
/config/getcalibration
/config/getreldefinition
- 1.3 Commissioning
Description
Read off serial number of
connected transmitter
Read off type of connected
transmitter/ probe
Read off firmware version
of connected transmitter
Read off firmware date of
connected transmitter
Read off online values of
connected transmitter
Read off view channels of
connected transmitter
Read off status of
connected transmitter
Read off last status
message of connected
transmitter
Read off service hour
counter of transmitter or
probe
Read off settings of
transmitter
Read off adjustment data
of transmitter
Read off relay information
of transmitter
Parameter
param=0 (for transmitter)
param=1 (for probe)
param=0 (for transmitter)
param=1 (for probe)
param=0 (adjustment set 1)
param=1 (adjustment set 2)
param=2 (adjustment set 3)
param=0 (relay 1)
param=1 (relay 2)
Answer (see Appendix)
serialnumber.xml
identification.xml
version.xml
firmwaredate.xml
onlinevalue.xml
viewchannels.xml
status.xml
laststatusmessage.xml
hourscount.xml
usersettings.xml
calibration.xml
reldefinition.xml