TESTO 6681 Instruction Manual page 27

The following description of the terminals refer to this
overview and its numbering.
1.3.3.2 Connecting voltage supply and analog outputs
1 Feed cable with voltage supply and analog signal lines through
opened M 16 x 1.5 screw connection (item (8) in Overview of
terminals, chapter 1.3.3.1, page 26.
2 Strip the cable ends, clamp wire end ferrules on and screw down
onto voltage terminals.
3 Close M 16 x 1.5 screw connection (item (8) in Overview of
terminals, chapter 1.3.3.1, page 26.
testo 6681 Ethernet
Terminal strip for voltage supply and
analog outputs (item (5) of Overview
of terminals, chapter 1.3.3.1, page
26).
- 1.3 Commissioning 27