Commissioning; Assembling The Instrument - TESTO 6681 Instruction Manual

testo 6681
16

1.3 Commissioning

1.3.1 Assembling the instrument

1.3.1.1
 Attaching rear panel bracket
1
1 Remove locking screw (item (4) of drawing below) and detach rear
panel bracket from plastic bracket (item (2) of drawing below).
2
Hold rear panel bracket in assembly position and mark the three drill
holes.
3
Drill three holes (∅ 5 mm) and insert dowels where necessary.
4 Screw on rear panel bracket.
Remember that the clamping brackets (1)must face the wall.
- 1.3 Commissioning
Wall mounting
(for testo 6611/6613/6614/6615/6617 probes)