TESTO 6681 Instruction Manual page 39

1.3.4.3 LED status displays
Characteristic
Colour
Status display for
Status: off
Status: stays on
Status: flashes
1.3.4.4 testo 6681 as Saveris subscriber
Set the IP address

Network cable must be connected.
The IP address of the transmitter can either be set via the P2A software
(transmitter accessories) or via the configuration menu of testo Saveris
TM
(testo Saveris
 Set IP address with the P2A software (see Chapter 3.3) or with the testo
TM
Saveris Startup Wizard (see instruction manual).
Using Saveris
 Start Saveris software (see instruction manual Measurement data
monitoring with testo Saveris)
1. [Start] | All Programs | Testo |
•
•
LED 1
green
Voltage supply
No voltage supply
Voltage supply present
Startup Wizard).
Ensure that the Saveris software is not already
open, for example in multi-user operation under
®
Windows Vista.
If multiple clients are installed in a network, make
sure that no simultaneous changes are made to
the system configuration by the clients during
simultaneous operation of the clients.
Select Saveris Professional Client (full version).
The entry is available if Saveris Professional Client is installed
Select Saveris Viewer (limited functionality).
The entry is available if Saveris Professional Viewer is installed
testo 6681 Ethernet
LED 2
green
LAN connection
No LAN connection
LAN connection
present
Data transfer
- 1.3 Commissioning 39
TM