testo 6681 Ethernet
82
1.4.6.7
Editing Message main menu
Messages can be confirmed/acknowledged, the last messages can be called
up and the display of the messages can be switched on or off.
Scaling changed
1
In Measuring Mode, press SET, select Main Menu Message using
or and confirm selection with SET.
2
Confirm Confirm message using SET.
3
Select Last messages using or and confirm with SET.
4
Scroll between the messages recorded so far using or and
press ESC to return to Last messages.
Continue to Display of message with or .
5
ON:
OFF:
6
Select ON or OFF using or and confirm selection with SET.
7
Return to Main Menu Message by pressing ESC.
8
Continue to Main Menu Ident using or or return to Measuring
Mode by pressing ESC.
- 1.4 Operation
348
h
4/7
Using the P2A software (see volume 2, chapter 3, page 142)
you can predefine which of the messages are to be shown in
the display.
Measurements are shown on the display in Measuring Mode.
No messages shown on display.
An overview of the messages can be found in chapter 1.5,
Status, warning and error messages, page 87.
Operating hours at the time of
message
Message number/number of messages
present
Example: "4/7" refers to the fourth of
seven messages
Message text